描述
The PhotoKleen PF filter is designed for extremely small-volume dispense applications where low hold-up volume and cleanliness is critical. The PhotoKleen PF filter unit consists of quick disconnect head manifold and the all fluoro-polymer capsule. This configuration allows for safe, quick and easy filter change-outs. Cleanliness and compatibility are ensured by the all fluoro-polymer construction.
Features and Benefits
- Capsule-style filter assembly same as the PhotoKleen EZD-2 filter
- Top in / top out flow direction, with inlet flow stream down to the bottom
- Easy filter replacement (one step)
- All fluoro-polymer construction
- PTFE media 0.1 and 0.2 μm grade available
- Minimized hold-up volume (50 mL)
- Optimized for 60 mm-width footprint
- Reduces chemical waste during filter startup and change out
规格
Materials of Filter Capsule
| Components | Materials |
| Filter Media | PTFE |
| Support and Drainage | PFA |
| Core, Cage, and End Caps | PFA |
| Housing | PFA |
| O-ring | Perfluoroelastomer |
| Removal Ratings | 0.1 μm, 0.2 μm |
| Filter Area | 900 cm2 |
| Maximum Operating Temperature | 50 °C / 122 °F |
| Maximum Operating Pressure | 0.29 MPaG @ 30 °C / 42 psig @ 86 °F |
Filter Capsule Dimensions*3
*3 PhotoKleen EZD-2 head manifolds are compatible with PhotoKleen PF capsules.
性能
Pressure Drop vs. Liquid Flow Rate (Water, 20°C)*2
*2 For liquids with viscosity differing from water, multiply the pressure drop by the viscosity in mPa･s.
类型
Filter Capsules
应用
Photolithography
订购信息
PHF12UC [1] E [2]
Table 1
| Code | Filter Media | Removal Ratings |
| FT | PTFE | 0.1 μm |
| FR | PTFE | 0.2 μm |
Table 2
| Code | O-ring Options |
| H11 | Perfluoroelastomer |
Dummy Cartridge
| Parts Number | O-ring Options | Memo |
| PHFC11H11C | Perfluoroelastomer | Dummy cartridge for system start up |
分类信息
Display
检查
Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.
*Subject to Terms and Conditions.
