UR229 Series Athalon™ Medium Pressure Duplex Filters

Pressure Drop Information

Housing pressure drop using fluid with 0.9 S.G.

Housing pressure drop is directly proportional to specific gravity.

Element Pressure Drop

Multiply actual flow rate times factor in table below to determine pressure drop with fluid at 32 cSt (150 SUS), 0.9 S.G. Correct for other fluids by multiplying new viscosity in cSt/32 (SUS/150) x new S.G./0.9. Note: factors are per 1000 L/min and per 1 US gpm.

210 Series Filter Elements – bard/1000 L/min (psid/US gpm)

Length Code	AZ	AP	AN	AS	AT
13	5.95 (0.327)	2.52 (0.139)	1.70 (0.093)	1.05 (0.058)	0.80 (0.044)
20	3.95 (0.217)	1.68 (0.092)	1.13 (0.062)	0.70 (0.038)	0.53 (0.029)

Sample ΔP calculation

UR229 Series 13” length housing with F20 (1¼” SAE) split flange ports using AN grade media. Operating conditions 75 L/min (20 USgpm) flow rate using a hydraulic fluid of 50 cSt and specific gravity (s.g.) 1.2.

Total Filter ΔP

= ΔP housing + ΔP element

= (0.5 x 1.2/0.9) bard (housing)

   + ((75 x 1.7/1000) x 50/32 x 1.2/0.9) bard (element)

= 0.67 bard (housing) + 0.27 bard (element)

= 0.94 bard (13.63 psid)

Housings, Vessels, or Assemblies

Auto LOH for Stamping, Heavy Lubrication, Material Handling, Auto Painting/Coating Zinc Phosphate Bath, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Midstream Process Water, Mining Equipment Gear Case, Mining Equipment Hydraulic Fluid, Mining Euqipment Lube Oil - on & off board, Mining Final Product (Post Smelt/Burn off Impurities), Mining Final Product (Slurry), Mining Wastewater, Municiple Mining Water [Rinsing] , Heavy Fuel, Heavy Fuel, Heavy Hydraulic, Heavy Hydraulic, Heavy Lubrication, Heavy Lubrication, Medium & Light Fuel, Medium & Light Fuel, Medium & Light Hydraulic, Medium & Light Hydraulic, Medium & Light Lubrication, Medium & Light Lubrication, Pulp&Paper Bleach Chemical Prep, Pulp&Paper LOH, Pulp&Paper Machine Process Application, Pulp&Paper Paper Coating, Pulp&Paper Pulp Screening, Auto Painting/Coating Zinc Phosphate Bath, Medium & Light Hydraulic, Medium & Light Lubrication, Midstream Process Water

  UR229 Service Instructions

For new installations, select one complete part number from each section below

Section 1 Housing P/N:

Note: Pall filter housings are supplied without filter elements or filter change out warning devices. Never operate the filter housing unless a filter element is fitted and all warning device ports are sealed.

Housing part number designates indicator port is fitted with a plastic shipping plug.

Part Number	Description
UR229CD2013ZS00001	UR229CD2013ZG1NYR85
UR229CD2013ZS00003	UR229CD2013ZA1NYR85
UR229CD2020ZS00001	UR229CD2020ZG1NYR85
UR229CD2020ZS00005	UR229CD2020ZA1NYR85
UR229CF2013ZS00001	UR229CF2013ZG1NYR85
UR229CF2013ZS00003	UR229CF2013ZA1NYR85
UR229CF2020ZS00001	UR229CF2020ZG1NYR85
UR229CF2020ZS00004	UR229CF2020ZA1NYR85

Part Number (Description) Breakdown

UR229C = UR229 series housing, cover service

C20 = 1¼” BSP ISO228 thread ports

D20 = 1¼” Flange ports SAE J518C code 61 (207 bar/3000)

F20 = 1¼” ISO 6162 split flange ports (250 bar/3625 psi max pressure)

13 = 13 inch nominal length

20 = 20 inch nominal length

Z = Fluorocarbon seals

G = 4.5 bard (65 psid) bypass valve

A = 1.7 bard (25 psid) bypass valve

1 = 1 indicator warning device port

N = No secondary port

YR85 = Iron/Steel construction

Section 2

Element P/N: UE 210 [Table 1][Table 2] Z

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 1: Filter Element Options
Code	ßx(c) ≥1000based on ISO 16889	CST Rating*
AZ	3	07/04/01
AP	5	11/08/03
AN	7	13/09/04
AS	12	15/11/06
AT	22	16/14/08
* CST: Cyclic Stabilization Test to determine filter rating under stress conditions, based on SAE ARP4205
Table 2: Filter Element Length Options
Code
13	13inch nominal length
20	20inch nominal length
* Nominal length

Section 3 Differential Pressure Indicator P/N: RC [Table 3] Z [Table 4] Z [Table 5]

(One Differential Pressure Indicator or ‘B’ type blanking plug must be ordered for each filter tower)

Note: If no Differential Indicator is selected, ‘B’ type blanking plug (P/N HC9000A104Z) must be ordered seperately and fitted to replace the shipping plug.

Note: Z indicates fluorocarbon seals are standard. Other options are available; contact Pall.

Table 3: Indicator Options

Code	Brass Option indicator
A218M	Electrical switch (SPDT) with Hirschmann connector
A218R	Electrical switch (SPDT) with Hirschmann connector with Red and Green LED indicators
A219D	Visual indicator

Code	Stainless Steel Option Indicator
778N	Visual filter with thermal lockout
861C	Electrical Switch (SPDT) with 6" leads
771B	Electrical switch (SPDT) with 3-pin

Table 4: Indicator Pressure Setting Option

Code	Description
084	For A valve option housings (1.1. bard. 16 psid)
091	For G valve option housings (3.5. bard. 50 psid)

Table 5: Differential Pressure Indicator Material

Code	Pressure Setting
Omit	If Brass Indicator is selected in Table 3
SS	If Stainless Steel Indicator is selected in Table 3 (recommended for high pressure applications with pressure > 200 bar (3000 psi)

Automotive, Mobile OEM, Primary Metals, General Industrial, General Industrial, General Industrial, General Industrial, General Industrial, General Industrial, Mining, Mining, Mining, Mining, Mining, Mining, Mining, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Mobile OEM, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, Pulp & Paper, General Industrial, General Industrial, General Industrial, General Industrial