Filter Fitting, Filter Plug, Modified AN314 product photo Primary L

Filter Fitting, Filter Plug, Modified AN314

Introduction

PAC Filter Fittings incorporate a permanently mounted filter element within its body.  This allows replacement of a standard fitting with a Last Chance Filter to protect each contaminant-sensitive component.

Specifications

  • Available in unions, tees, elbows--virtually any size or configuration required
  • Rigimesh® sintered woven wire cloth material -- no media migration
  • Excellent flow vs. delta p characteristics
  • No system modifications required
  • Direct replacement of standard fittings
  • Wide variety of material available
  • Proprietary Design


Contact Us
* 必填项

描述

Introduction

PAC Filter Fittings incorporate a permanently mounted filter element within its body.  This allows replacement of a standard fitting with a Last Chance Filter to protect each contaminant-sensitive component.

Specifications

  • Available in unions, tees, elbows--virtually any size or configuration required
  • Rigimesh® sintered woven wire cloth material -- no media migration
  • Excellent flow vs. delta p characteristics
  • No system modifications required
  • Direct replacement of standard fittings
  • Wide variety of material available
  • Proprietary Design

规格

PALL AEROPOWER P/N 20535---
FILTER FITTING, FILTER PLUG, MODIFIED AN314





-
Size

T
Thread

Ø A

Ø B
± .015

D
+ .015
- .047


E

Ø F
+ .002
- .003

S
+ .015
- .000

- 2 .3125-24 .062 .219 .547 .563 ± .004  .250 .063
- 3 .3750-24 .125 .281 .563 .625 ± .004  .313 .063
- 4 .4375-20 .171 .344 .625 .688 ± .004  .364 .075
- 5 .5000-20 .234 .406 .625 .750 ± .004  .427 .075
- 6 .5625-18 .296 .469 .719 .813 ± .004  .482 .083
-
- 8 .7500-16 .390 .625 .781 1.000 ± .004  .660 .094
- 10 .8750-14 .484 .750 .781 1.125 ± .005  .773 .107
- 12 1.0625-12 .609 .938 1.000 1.375 ± .005  .945 .125
- 16 1.3125-12 .843 1.188 1.000 1.625 ± .016  1.195 .125
- 20 1.6250-12 1.078 1.500 1.000 1.875 ± .016  1.507 .125
1
- 24 1.8750-12 1.312 1.719 1.000 2.125 ± .020 1.756 .125
- 28 2.2500-12 1.546 2.094 1.000 2.500 ± .020  2.131 .125
- 32 2.5000-12 1.781 2.344 1.000 2.750 ± .020  2.381 .125


  MICRON RATING (NOMINAL)

CODE              Liquid Service Gas Service
Nominal  µm
Rating
Absolute µm
Rating
Nominal µm
Rating
Absolute µm
Rating
2 2 15 1 9
5 5 18 3.5 13
10 10 25 6 18
17 17 45 11 25
40 40 70 30 55
70 70 105 50 85
105 105 150 85 130
145 140 205 120 175
250 250 260 250

260

NOTES AND SPECIFICATIONS:
  •  FIRST MODIFIER SPECIFIES PLUG MATERIAL:
            "C" FOR STAINLESS STEEL (AISI) TYPE 300 SERIES CRES.
            "A" FOR ALUMINUM ALLOY (WITH ANODIZE FINISH).
     SECOND MODIFIER SPECIFIES SIZE PER AN814.
     THIRD MODIFIER SPECIFIES NOMINAL MICRON RATING (SEE FILTRATION TABLE)
       4.   FILTER MEDIUM:  RIGIMESH® SINTERED STAINLESS STEEL WOVEN WIRE MESH AISI TYPE 300 SERIES, CRES.

    类型

    Filter Cartridges

    应用

    Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters, Last Chance Filters

    分类信息

    Commercial - Fixed Wing, Commercial - Fixed Wing, Commercial - Fixed Wing, Commercial - Rotary Wing, Commercial - Rotary Wing, Commercial - Rotary Wing, Military - Fixed Wing, Military - Fixed Wing, Military - Fixed Wing, Military - Rotary Wing, Military - Rotary Wing, Military - Rotary Wing, Military - Vehicles

    检查

    Earn 10% off* your next order online by leaving a review of this product. Please login to your account to leave a review. We appreciate and value your feedback.

    *Subject to Terms and Conditions.